Filter
Top Products
51
5. Troubleshooting
Error & Status Messages on the Operation
Panel
Messages Description Comments
Add Staples The stapler is empty. Replace the staple refill
with a new one.
⇒
P.75
“Adding Staples”
Add Toner The printer is out of toner. Replace a new toner bottle.
Call Service
Power Off On
The Service Code Number
identifies the failure.
Contact your sales or ser-
vice representative.
Call Service
SC_###
The Service Code Number
identifies the failure.
Turn the printer power off
and on. If the message ap-
pears again, contact your
sales or service representa-
tive.
Close Bridge
Unit Cover
The cover of Bridge Unit
Type 270 is open.
Close the cover of Bridge
Unit Type 270.
Close
Finisher Cover
The cover of SR720 (finish-
er) is open.
Close the cover of SR720
(finisher).
Close
Front Cover
The front cover is open. Close the front cover of the
printer.
Close
Mailbox Cover
The cover of CS370 (4-bin
Mailbox) is open.
Close the cover of CS370 (4-
bin Mailbox) cover.
Close Right
Cover
The right cover of the print-
er is open.
Close the right cover of the
printer.
Close R-Cover at
Paper Tray
Lower right cover 1 or 2 is
open.
Close lower right cover 1 or
2.
Close Upper
Right Cover
The upper right cover is
open.
Close the upper right cover.
Cls. Interchange
Unit Cover
The Interchange Unit Type
280 cover is open.
Close the interchange unit
cover.
Energy Saver 1 In Energy Save Mode level
1.
Press the operation key or
send a job from the com-
puter to turn the power on.