Filter
Top Products
Troubleshooting
64
5
If you print using the
PostScript driver, print-
ing does not start or is
interrupted.
The data is cleared when the Job Timeout period is exceed-
ed.
❖
Windows 95/98
Set a longer
[
Job Timeout
]
period with the
[
PostScript
]
tab
of the Printer Properties.
❖
Windows NT 4.0
Set a longer
[
Job Timeout
]
period with the
[
Device Settings
]
tab of the Printer Properties.
❖
Windows 3.1x
Set a longer
[
Job Timeout
]
period with the
[
PostScript
]
tab
of the Printer Setting dialog box.
A PostScript error might occur if there is not enough mem-
ory in the printer, or there are errors in the print data sent to
the printer.
• Print a configuration page to configure the memory size
and confirm the memory size is max or not.
• If the memory size is not max, increasing the memory
may solve this problem. Install Printer Feature Expander
Type 185. Otherwise you should contact your sales or
service representative. For more information on the
memory, see P.109 “Memory Capacity and Printer Func-
tion”.
The print job might be reset. Do the following.
• Confirm that you have selected the correct printer driv-
er. Try printing again.
• Set a longer Wait Timeout.
❖
Windows 95/98
Set a longer
[
Wait Timeout
]
period with the
[
PostScript
]
tab of the Printer Properties.
❖
Windows NT 4.0
Set a longer
[
Wait Timeout
]
period with the
[
Device Set-
tings
]
tab of the Printer Properties.
❖
Windows 3.1x
Set a longer
[
Wait Timeout
]
period with the
[
PostScript
]
tab of the Printer Setting dialog box.
❖
Macintosh
You can specify a longer
[
I/O Timeout
]
period on the
printer's operation panel.
⇒
P.89 “Using the Operation
Panel”
Possible Cause Solutions