Ringdale ISDN Network Router User Manual


 
101
Figure 10
To make a selection from the Setup menu, press the number
or letter appearing in the left column of the menu above.
You will not have to press the Enter key, your selection will
automatically be read by the computer.
You can always change a selection by selecting the option
again, and you can always go back to the Setup menu
whenever you want.
Selection 1 represents features for the operating system.
Whenever you are setting up features, an asterick (*) means
the unit must be reset for changes to take effect.
Turn the page for instructions on configuring the operating
system.
CONFIGURING WITH A LOCAL CONSOLE
O v e r L A N
Setup menu
1. - Operating System
2. - ISDN Manager
3. - PPP Manager
4. - IP Protocol
5. - IPX Protocol
6. - BRIDGING
7. - Static IP Routing Table
8. - Filter Table
9. - Host Table
S - Save Setup and Exit
X - Exit without Saving
Selection: