Ringdale ISDN Network Router User Manual


 
27
CONFIGURING YOUR ROUTER
Link Closed Communications link has closed.
Closing Communications link is being closed.
Stopped Communications link has been stopped.
Stopping Communications link is being stopped.
Request Sent Configuration request is being sent.
Ack Received Configuration accepted by remote device.
Ack Sent Accepting remote configuration request.
Disconnecting [State 11] A disconnect command has been received.
Releasing [State 19] Ending the call.
The B-channel states that do not end with a [state #] are part of
PPP (Point to Point Protocol).
Status Messages
Status Messages appears under the General Tab for the properties
for a router.
This area shows messages about the current operation of the
selected router. These messages can be useful when
troubleshooting the router or ISDN line.