Filter
Top Products
132
If you chose Enabled for IP Routing, then the following
additional prompts will appear:
For local IP address and local IP mask, type a number in the form of
_ _ _ . _ _ _ . _ _ _ . _ _ _, where each _ _ _ is a number ranging from
001 to 255, and press the Enter key.
To leave a setting unchanged, press just the Enter key.
Local IP Address :
This is the IP address for your Ethernet network.
Local IP Mask :
This is the IP mask for your Ethernet network.
Then the prompt
Translation : Disabled
will appear.
The default of Translation is Disabled.
Pressing the spacebar switches between Disabled and Enabled.
This feature allows the router to be used with a low-cost
Internet connection supporting dynamic IP address
assignment.
Then the prompt
WAN IP Mode : Fixed/Assigned
will appear.
Some ISPs (Internet Service Providers) use dynamic IP
address assignment for which a different IP address can be
assigned with each connection. If this is the case with your
ISP, the option Assigned should be selected with no Wan IP
address entered. Other ISP's use a fixed Wan IP address
dedicated to your account. In this case, you should set the
Wan IP address option to Fixed and type in the dedicated
Wan IP address.
CONFIGURING WITH A LOCAL CONSOLE