Filter
Top Products
83
For OverLAN routers, the Peer Name and Peer Password for
the remote router must correspond to the Unit Name and
Unit Password for the selected router.
For routers or devices of other manufacturers, you must be
sure that the remote device settings correspond correctly with
the settings on the OverLAN router. Refer to the instructions
included with the remote device for additional information.
Step 9: Setup Send PAP Authentication.
The default of Send PAP Authentication is off.
Send PAP Authentication: Enabling Send PAP
Authentication makes the selected router transmit its Peer
Name and Peer Password to the remote router or device it is
calling. If Send PAP Authentication is enabled and the
remote device does not support PAP, the remote device may
hang-up the call or only give limited access.
PAP Peer Name and PAP Peer Password: This is the name
and password to be supplied to the remote device. Peer
Name and Peer Password should be no more than 10 letters
and/or numbers. If one or both of these fields are left blank
and Send PAP Authentication is enabled, then the selected
router will send a blank ID and/or password to the remote
device.
For OverLAN routers, the Peer Name and Peer Password for
the selected router must correspond to the Unit Name and
Unit Password for the remote router.
For routers or devices of other manufacturers, you must be
sure that the remote device settings correspond correctly with
the settings on the OverLAN router. Refer to the instructions
included with the remote device for additional information.
CONFIGURING YOUR ROUTER