Ringdale ISDN Network Router User Manual


 
23
CONFIGURING YOUR ROUTER
Using OverLAN Commander 32/IP
To establish a communications link with a remote router or another
communications device, use the following instructions.
Disclaimer
Due to the varieties and complexities of networks and applications,
it is the responsibility of the network administrator to determine the
cost of all line charges, or any other charges which may be
incurred, resulting from the use of the OverLAN Ethernet/ISDN
router. Such charges are not the responsibility of Ringdale.
Step 1: Select a Router
Select a router from the Routers part of OverLAN Commander. To
select a router you must double-click on the name or icon of the
router. When a router has been selected, a dialog box of Router
Properties will appear.
Step 2: Initialize the Router
If the selected router is a new router or if it has been moved onto a
another network recently, you may need to initialize the router. If
the router requires initialization, a Router Initialization dialog box
will appear (shown below) instead of the Router Properties dialog
box. Once initialized, the Router Properties dialog box will
appear.