Ringdale ISDN Network Router User Manual


 
5
Getting Started
The following items are included in the OverLAN router package:
The Ethernet/ISDN router,
An RJ11 - DB25 communications cable,
An unshielded RJ45 ISDN cable,
The power cord,
A 10BASE-2 T-connector,
3.5 inch disk(s) for OverLAN Commander,
This manual and a warranty return card.
Before starting to setup the router, you need the following:
A fully operating Ethernet using TCP/IP and/or Novell
Netware,
An NT-1,
A shielded RJ45 Ethernet cable,
An ISDN BRI line -- you will need to know the ISDN
phone number(s) and SPID (only required in the USA)
number(s),
A 9DB - DB25 pin adaptor if you have a computer with a
9-pin serial port,
A computer running Microsoft Windows (version 3.11 or
greater), or optionally an ASCII terminal or a computer
running terminal software.
No additional tools are needed to install your router.