Filter
Top Products
88
CONFIGURING YOUR ROUTER
When Bridge is on, indicated by next to Bridge, you
can setup your router to act as a bridge between two
physical networks.
To configure Bridging, use the mouse and click on
The Bridge Setup dialog box is shown below:
Bridge Setup dialog box
The filters only work for Ethernet II frame types. Other
frame types such as Ethernet 802.3 cannot use the filters,
but the router can still act as a bridge. It just will not be able
to use filters in that situation. Choose any of the filters
individually or in combination.
Choices:
• Filter IPX prevents IPX packets from crossing the
bridge.
• Filter IP prevents IP packets from crossing the bridge.