Filter
Top Products
112
The prompt
Bandwidth on Demand: [Disabled]
may appear beneath the previous prompt.
This prompt will not appear if On Demand is selected for
Call Type (described earlier in this section of the manual)
with PPP Multilink enabled.
The default of Bandwidth on Demand is Disabled.
Pressing the spacebar on the keyboard will change the
setting to Enabled. Pressing the spacebar again will
change the setting back to Disabled, and so forth.
Choices:
• Disabled prohibits the router from automatically opening a
second B-channel to handle larger data flows. If this
feature is disabled and the router is setup to use both
B-channels, then the router will use both channels
regardless of the amount of data being transferred.
• Enabled allows the router to automatically open a second
B-channel when there is sufficient data to require both
channels.
Press the Enter key when you are ready to continue.
NOTE: Due to the varieties and complexities of networks and
applications, it is the responsibility of your network administrator,
and not that of Ringdale, to determine the cost of all line charges, or
any other charges which may be incurred, resulting from the use of
the OverLAN Ethernet/ISDN router. Such charges are not the
responsibility of Ringdale.
CONFIGURING WITH A LOCAL CONSOLE