Ringdale ISDN Network Router User Manual


 
152
Turning the Router on or off.
To turn on the router, follow the instructions in Task 3 of
Installing Your OverLAN Router.
To turn off the router, simply unplug the unit. But, unless it’s
an emergency, be sure there is no data currently transferring.
To determine if data is transferring or not, you should look to
see if the indicator lights for Transmit and Receive are
currently lit. If these indicator lights are lit, then data is
transferring. It is recommended that you wait until no data is
transferring before turning off the unit.
Using the Router Control Panel.
The following illustration shows the indicator lights and
buttons on the front of the router.
Front View of the OverLAN Router
OPERATING YOUR ROUTER