Filter
Top Products
119
The prompt
Local B2 SPID number :
will appear.
A SPID number may be needed if you set Telco. Type to
NI-1. You should consult your Network Administrator to
find out if a SPID number is required.
Choices:
Do one of the following:
• If your router has only one ISDN SPID number,
type that same number here again.
• If your router has two ISDN SPID numbers, type
the number corresponding to channel B2 here.
• Type nothing if SPIDs are not required in your area.
NOTE: ISDN Phone numbers and ISDN SPID numbers are
available from the phone company. For more information about
them, you will need to contact your ISDN provider.
Press the Enter key when you are ready to continue.
CONFIGURING WITH A LOCAL CONSOLE