Filter
Top Products
67
From the View Menu, you can select Options. When selected, the
Options dialog box will appear.
This topic describes the Options dialog box (shown below).
Additional Addresses to Monitor
This section of the dialog box is where you specify IP Addresses of
remote devices (such as other OverLAN routers) that you want to
monitor with OverLAN Commander. You can force OverLAN
Commander to refresh the router list by right clicking on the area
for listing routers and then selecting Poll for Routers.
IP Address: In this data field, specify the IP Address of the
device that is to be monitored. Type the IP Address in the form of
xxx.xxx.xxx.xxx, where each xxx is a number ranging from 1 to
255.
CONFIGURING YOUR ROUTER