Filter
Top Products
150
Router IP Address :
This is the first router on the path a packet will take to reach the network
mentioned above.
Hops Away :
This represents how many routers a packet will pass through to arrive
at the network mentioned above.
After pressing the Enter key for Hops Away, the
following message will appear:
Is the above setup information correct? (y/n) -
Type n to start over with this section.
Type y to use the current settings. While the settings will be
used by the router, they are not actually saved. To save the
settings, you must select SAVE from the command prompt of
the OverLAN Operating System.
CONFIGURING WITH A LOCAL CONSOLE