Filter
Top Products
55
simultaneous access to the router (for the Internet, for example)
using a single dynamic IP address.
NOTE: If 1 to 1 Dynamic is selected, the router must be locked by
the user before Internet access is permitted and released after
closing the connection. Select lock or release from the toolbar, the
Router menu, or from a pop-up menu accessed by right-clicking on
the router name in the list of routers.
Static Client IP Address: If 1 to 1 Static IP Address Translation is
selected, then you must type the IP address of the computer or
device getting access to the router. Reset of the router is required
when enabling this option.
WAN IP Assignment: This needs to be setup if you selected either
1 to 1 Dynamic or 1 to Many. Some ISPs (Internet Service
Providers) use dynamic IP address assignment for which a
different IP address can be assigned with each connection. If this
is the case with your ISP, the option Assigned should be selected
with no Wan IP address entered. Other ISP's use a fixed Wan IP
address dedicated to your account. In this case, you should set the
Wan IP address option to Fixed and type in the dedicated Wan IP
address.
WAN IP Address: If WAN IP Assignment is set to Fixed
then you must enter the WAN IP Address here.
CONFIGURING YOUR ROUTER