Ringdale ISDN Network Router User Manual


 
17
You can also right-click on a router name from the list of
routers and then select Change IP Address to open the
Router Initialization dialog box.
Type in the IP Address that you want this router to have.
You should type the IP Address in the form of
xxx.xxx.xxx.xxx, where each xxx is a number ranging from
1 to 255.
Type in the Subnet Mask for the router. You should type the
Subnet Mask in the form of xxx.xxx.xxx.xxx, where each
xxx is a number ranging from 1 to 255.
Once the router has been initialized, a properties dialog box
will appear, similar to the following.
Properties Dialog Box
CONFIGURING YOUR ROUTER