Ringdale ISDN Network Router User Manual


 
149
A static routing table is used when you want to designate
the exact route a packet will travel through the network,
helpful when you want to control traffic on the network.
To create or edit an entry, type E.
To delete an entry, type D.
To exit from the static routing table, type X.
If you type D, the prompt
Entry to Delete?
will appear.
Type the number under the column Entry that corresponds to the
information you wish to delete.
Press the Enter key.
The information is deleted.
If you type E, the prompt
Entry to Edit?
will appear.
Type the number under the column Entry that corresponds to the
information you wish to edit.
Press the Enter key.
The following prompts will appear (Each item depends on your particular
network layout):
IP Network Address :
This is a network that is reachable locally by your router without it
having to route through ISDN.
Subnet Mask :
This is the subnet mask corresponding to the above network.
CONFIGURING WITH A LOCAL CONSOLE