Filter
Top Products
120
The prompt
Line Idle Detection :
will appear.
Select this option if the device being called is an OverLAN
router (or another type of device that is compatible with Line
Idle Detection). This option allows the router to detect
certain disruptions in the communications link with the
remote device and hang-up. If you are not sure whether
the remote device supports Line Idle Detection, disable this
option.
Choices:
• Enable this option.
• Disable this option.
Press the Enter key when you are ready to continue.
The following message will appear:
Is the above setup information correct? (y/n) -
Type n to start over with this section.
Type y to use the current settings. While the settings will be
used by the router, they are not actually saved. To save the
settings, you must select SAVE from the command prompt of
the OverLAN Operating System.
You may now go to Task 4.
CONFIGURING WITH A LOCAL CONSOLE