Filter
Top Products
69
Maximum number of Re-transmissions
This is the maximum number of times that the router will re-
transmitt to the device being called after getting no response from
the device before giving up. Generally, 15 retries should be
sufficient for most devices and networks. However, a larger
number of retries could be necessary to compensate for congested
networks or slow devices. How you set this option depends
somewhat on how you set the RE-Transmission Timeout setting
above. Generally, if the Re-Transmission Timeout is set to 1 or 2
seconds, then you would likely not need to set this option to any
more than 30 retires -- beyond which there may be a problem that
needs attention (as described under Re-Transmission Timeout
above). This option can in fact be set to as high as 99 retires.
However, such a setting is far in excess of what would be
considered the norm. Consider, for instance, that with just a 1
second timeout and 30 retries, the user might wait a total of a half a
minute while the router attempts to get a response from the remote
device.
Show Splash Screen upon Program Execution
This option (when checked) enables the Splash Screen to appear
on the screen as the program is initiating execution. Uncheck this
option to disable to splash screen.
CONFIGURING YOUR ROUTER