Filter
Top Products
Troubleshooting_ 5
2. Press the green release handle to release the paper transfer belt.
Holding the handle on the paper transfer belt, lift it out of the machine.
3. Remove the jammed paper by pulling in the direction shown. To avoid
tearing the paper, pull it out gently and slowly.
4. Holding the handle on the paper transfer belt, align it with the slots on
the inside of the front door.
5. Lower the paper transfer belt until it is parallel with the front door and
firmly seated.
6. Close the front door to resume printing.
If the front door is not completely closed, the machine will not
operate.
In exit area
Click this link to open an animation about clearing a jam.
1. Ope
n and close the front door. The jammed paper is automatically
ejected from the machine.
If you do not see the jammed paper, go to next step.
2. Gen
tly pull the paper out of the output tray.
If you do not see the jammed paper or if there is any resistance when
you pull, stop and go to the next step.