Sharp MX-FX13 Scanner User Manual


 
88
PROGRAMMING
INITIAL PROCEDURE FOR ENTERING CHARACTERS
Entering alphabetical characters
(example: TPS)
1
Open the Rapid key overlay.
To switch between upper case letters and lower case
letters, press the [SHIFT] key.
2
Enter "T", "P" and "S" with the letter
keys.
The letters are stored and the cursor moves to the
space after the letters.
Entering numbers (example: 123)
1
Enter "1", "2", and "3" with the
numeric keys.
Entering symbols
1
Press the [SYMBOL] key.
2
Select the symbol that you wish to
enter with the [ ][ ][ ][ ] keys.
To move to the next page, move the cursor to the
bottom line and press the [ ] key. To move back to
the previous page, move the cursor to the top line and
press the [ ] key. You can also change pages by
pressing the [ ] key when the cursor is at the right
end of the bottom line, or the [ ] key when the cursor
is at the left end of the top line.
3
Press the [OK] key.
The symbol selected with the cursor is entered and
you return to the character entry screen.
To change a character, press the [C] key.
The character directly to the left of the
cursor is cleared.
If the cursor is over a character, that
character is cleared.
• To change a character, press the [C]
key. The character directly to the left
of the cursor is cleared.
• If the cursor is over a character, that
character is cleared.
ENTER NAME
ABC
46 47 48 49 50
41 42 43 44 45
36 37 38 39 40
31 32 33 34 35
26 27 28 29 30
ABCDE
FGHIJ
KLMNO
PQRST
UVW
XYZ
SP
ENTER NAME
TPS
ABC
Note
ABC DEF
JKLGHI MNO
TUVPQRS WXYZ
@.-
_
READ-END
ACC. #-C
OK
ENTER NAME
123
ABC
Note
If the Rapid key overlay is opened or closed
while a symbol is being selected, the symbol
currently selected with the cursor is entered
and you return to entry mode.
SYMBOL
SPACE/–
REDIAL/PAUSE
SPEED
COMM. SETTING
FAX
SCAN
PRINT
SYMBOL
! " # % & ' (
) + , - . / :
; < = > ? @ [ \
1/ 2
PQ
ACC
LEX SCAN
LEX SCAN
ED COPY
SYMBOL
! " # % & ' (
) + , - . / :
; < = > ? @ [ \
1/ 2
GHI
PQRS
BACK
OK
ENTER NAME
#
ABC
Note