Filter
Top Products
72 Appendix A: Disassembling and Reassembling the Cabinet
1. If you removed a mounting arm, as described on page 63, replace it and insert the
three hex socket screws as shown below.
2. Feed the videoconferencing unit’s cables through the appropriate hole in the mounting
arm.
3. Reinstall the videoconferencing shelf on the mounting arm and tighten the
thumbscrew.
4. Return the videoconferencing unit to the shelf and reconnect it.
To reinstall the videoconferencing shelf
Safety Screw
Videoconferencing
Shelf
Thumbscrew
NOTE: The cables aren’t
shown in this illustration.