Filter
Top Products
Configuring the SMART Hub SE240 39
Power State Commands
The following table presents the power state commands.
Input Selection Commands
The following table presents the input selection commands.
Command Description
on
Turns on the SMART Hub SE240.
off
Turns off the SMART Hub SE240.
NOTE: Alternatively, use the command
off now.
get powerstate
Requests the SMART Hub SE240 power state.
Possible returned values when using the SMART Hub SE240
with a Unifi 45 projector:
•
startup
•
on
•
shutdown
•
off
Possible returned values when not using the SMART Hub
SE240 with a Unifi 45 projector:
•
on
•
standby
Command Description
set input dvi-1
Selects the first computer input
set input dvi-2
Selects the second computer input
set input composite
Selects the composite video source input
set input s-video
Selects the S-video source input
set input whiteboard
Selects Whiteboard
get input
Requests the projector’s current input