Filter
Top Products
Programmer’s Model
ARM DDI 0389B Copyright © 2006 ARM Limited. All rights reserved. 3-7
3.3.2 SMC Memory Interface Configuration Register at 0x1004
The read-only smc_memif_cfg Register provides information on the configuration of
the memory interface. This register cannot be read in the Reset state. Figure 3-7 shows
the register bit assignments.
Figure 3-7 smc_memif_cfg Register bit assignments
Table 3-3 lists the register bit assignments.
PHPRU\BW\SH
PHPRU\BFKLSV
PHPRU\BZLGWK
UHPDS
H[FOXVLYHBPRQLWRUV
8QGHILQHG 5HVHUYHG
Table 3-3 smc_memif_cfg Register bit assignments
Bits Name Function
[31:18] - Reserved, read undefined.
[17:16] exclusive_monitors Returns the number of exclusive access monitor resources that are implemented in the
SMC:
b00 = 0 monitors
b01 = 1 monitors
b10 = 2 monitors
b11 = 4 monitors.
[15:7] - Reserved, read undefined.
[6] remap0 Returns the value of the smc_remap0 input.
[5:4] memory_width0 Returns the maximum width of the SMC memory data bus for interface 0:
b00 = 8 bits
b01 = 16 bits
b10 = 32 bits
b11 = Reserved.