Filter
Top Products
Programmer’s Model for Test
ARM DDI 0389B Copyright © 2006 ARM Limited. All rights reserved. 4-3
Table 4-2 lists the register bit assignments.
4.1.2 Integration Inputs Register at 0x1E04
The read-only smc_int_inputs Register enables an external master to access the inputs
of the SMC using the APB interface. This register is only for test. This register cannot
be read in the Reset state.
Figure 4-3 shows the register bit assignments.
Figure 4-3 smc_int_inputs Register bit assignments
Table 4-3 lists the register bit assignments.
Table 4-2 smc_int_cfg Register bit assignments
Bits Name Function
[31:1] Undefined Read undefined. Write as zero.
[0] int_test_en When set, outputs are driven from the integration test registers and tied-off, and inputs can change
for integration testing.
VPFBPV\QF
VPFBDV\QF
VPFBHELEDFNRII
VPFBHELJQW
VPFBFV\VUHT
8QGHILQHG
VPFBXVHBHEL
Table 4-3 smc_int_inputs Register bit assignments
Bits Name Function
[31:6] - Reserved, read undefined
[5] smc_msync0 Returns the value of this top-level tie-off
[4] smc_async0 Returns the value of this top-level tie-off
[3] smc_ebibackoff0 Returns the value of the smc_ebibackoff0 input