12
Operation
SOURCE/
MEMORY
MEMORY
PAGE
CAPTURE
PRINT
Notes
When storing ink ribbon cartridge:
• Avoid placing the ink ribbon in a location subject to:
— high temperatures
— high humidity
— excessive dust
— direct sunlight
• Store a partially used ink ribbon cartridge in its original packaging.
If your ink ribbon should tear
Repair the tear with transparent tape. There should be no problem with using the
remaining portion of the ribbon.
Loading Paper
To load paper, follow the procedure below. Be careful not to touch the printing
surface.
Notes
• You can load paper regardless of whether the power is on or off. However,
turning off the power will cause the image stored in the memory to be lost.
• Use the only paper that we recommend. Failing to do so is likely to result in
malfunctions such as paper jam. Also, do not use the paper as specified for the
UP-5000/5100 and UP-5500 series color video printer.
(See “Ink Ribbon and Paper” on page 124.)
1 Open the front panel by pulling the front panel top towards you.
2 Push the paper tray.
The paper tray pops out.
Transparent tape
Turn the spools in the direction of the arrow
to remove any slack until the transparent
tape cannot be seen.
Before Printing (Continued)