Sony UP-50 Printer User Manual


 
82
Installation and Adjustment
100/11/12/13
SYSTEM SETUP
LCD - CONTR : 7
BAUDRATE : / 24 / 4800 / 96
BEEP : OFF / ON
APPLI. : STANDARD /
IRE : 100 / 11 / 12 / 13
SAVE USER : 1 / 2 / 3 [ EXEC ]
PRN SETUP : PRESS [ > ]
USER NAME : PRESS [ > ]
Q1 A 1
S
COLOR : 200
I
RE :
SYSTEM SETUP
LCD - CONTR : 7
BAUDRATE : / 24 / 4800 / 96
BEEP : OFF / ON
APPLI. : STANDARD /
IRE : 100 / 11 / 12 / 13
SAVE USER : 1 / 2 / 3 [ EXEC ]
PRN SETUP : PRESS [ > ]
USER NAME : PRESS [ > ]
Q1 A 1
S
COLOR : 200
I
100/11/12/13
RE :
3 Select IRE by pressing the F or f button.
4 Select the desired IRE value by pressing the G or g button.
The selected IRE is displayed in three digits.
When IRE value
Resetting to the standard adjustment 10 t 100
The printout is a little whitish. 11 t 110
The printout is whitish. 12 t 120
The printout is very whitish. 13 t 130
Note
Do not compensate for the input signal too much. Doing so results in the whole
of the printout becoming dark.
5 Press the MENU button.
The regular screen appears.
Position the cursor at IRE by
pressing the F or f button.
Press the F or f button until IRE appears.
Switch the desired IRE value to green
by pressing the G or g button.
Display the desired IRE value
by pressing the G or g button.
Setting Up the Printer (Continued)