Filter
Top Products
Chapter 3. Preparing the Library
43
Connecting the AC Power
Connect the AC power cord supplied with the library to the AC connector on the rear
of the library. Connect the other end to a 110-volt or 220-volt AC, 50/60 Hz outlet.
The host system must be configured for the library, and the library and all SCSI
peripheral devices must be powered up and ready before you power up and boot the
host system.
Figure 3-13 N-node public loop.
Storage Cluster
Spectra
10000
Library
Hub
Bridges
System Cluster
Hub
Fabric (Switch)
Servers
FL Port
Legacy
Storage