Filter
Top Products
Chapter 4. Configuring the Library
56
2. From the main screen, touch the SPECTRA 10000 button to view the Spectra
10000 screen (Figure 4-3).
• Examine the SCSI ID list. Be sure that the library and drive SCSI IDs on this
screen correspond to the SCSI IDs you need.
• Note the library SCSI IDs (0 and 1 in the second screen in Figure 4-3).
The first ID number indicates the library’s SCSI ID number on the first SCSI
bus. The second number indicates the library’s ID on the second bus. On
libraries with the two busses joined into a single bus (differential only), or a
library with SCSI Bus 2 ID set to OFF, only the first SCSI ID is displayed.
3. Touch anywhere on the Spectra 10000 screen to return to the main screen.
Figure 4-3 Accessing information on the Spectra 10000 screen.
Library SCSI IDs