Filter
Top Products
Chapter 4. Configuring the Library
54
Configuring Library Tape Drive Settings
Depending on the host you are using with the library, you may need to adjust the drive
emulation settings used by the library drives. From the main screen, press Config >
More > More to access the third configuration screen.
For a list of tape drive emulations, see Available AIT Drive System Compatibility Modes
on page 114. For information on the effects of setting these emulations, see Functional
Changes for Specific Drive Emulation Selections on page 115.
Emulate 1/2
The library’s AIT tape drives can emulate other drive types for compatibility with your
host system. The Emulate 1/2 setting determines the correct emulation for Drives 1 and
2 for your host’s operating system.
• Touch the + and - symbols next to the Emulate 1/2 box to scroll through the 16
available drive emulations.
Emulate 3/4
The library’s AIT tape drives can emulate other drive types for compatibility with your
host system. The Emulate 3/4 setting determines the correct emulation for Drives 3 and
4 for your host’s operating system.
• Touch the + and - symbols next to the Emulate 3/4 button to scroll through the 16
available drive emulations.