Filter
Top Products
5-55
System Setup Menu
Define
Pens:
Return:
RS232 GPIB
Slow
Plot Speed
Baud Rate
Plot Mode
9600 bd
Fast
Setup Plotter The Setup Plotter submenu configures the SR850 plotter driver. Inter-
face, plot speed, and pen definitions are set in this submenu. To actually
start plotting, use the [PLOT] key to select the Plot menu.
Plot Mode The SR850 can drive either an RS232 or GPIB interface plotter. The plot-
ter must be HP-GL compatible. This function selects which interface to
use. The plotter connects to the RS232 or GPIB connector on the rear
panel.
Baud Rate If the Plot Mode is RS232, then the Baud Rate for the
plotter may be selected. The baud rate is adjusted using
the knob and must match the baud rate of the plotter.
Plotter Address
Return
Return
Cursor Pen
Alpha Pen
Grid Pen
Trace Pen
Define Pens
Plot Speed
Baud Rate
Settings
Plot Mode
Plotter
RS232 GPIB
SYSTEM
SETUP
Baud Rate
9600 bd