Filter
Top Products
5 P s
There are two escape sequences to define the plot size of the drawing:
<ESC>
*C t7 K
in which
t7 is the horizontal size of the GL/2 plot in inches.
<ESC>
*C H L
in which n is the vertical size of the GL/2 plot in inches.
These commands fittheGL/2 plot intothepictureframe, establishingscaling
factors using the formula:
(plot size)/(picture frame size divided by 720)
If ~iin either of these is zero, thedefault values (the sizeof the picture frame)
are used.
1