Filter
Top Products
10J
10U
1IQ
IIU
12u
13J
14J
15U
PSText
IBM-PC(US)
ECMA-947Bit*
IBM-PC(Denmark/Norway)
PC-850
VenturaInternational
VenturaUS
Pi fontsymbols
To select a symbol set code for your secondary font, flip the parenthesis:
<ESC> ) n
and for n substitute your choice from the codes above.
Selecting the current or default symbol set
Your printer can use either the primary or the secondary font as its current
font. And that current font has its current symbol set. Your printer also
remembers its default font and symbol set, which are Courier with Roman-
8 (unless you’ve changed their initial parameter values through the control
panel menu).
The following command lets you select one of those symbol sets for your
primary font.
<ESC> ( n @
For n enter one of the following selection values for your primary font:
n VALUE
SELECTION
O(zero) or 1(one)
Selects the default symbol set
2 Selects the current font’s symbol set (this
forces theprinterto selectitsbestmatching
font)
3
Selects all of the default font’s attributes
(not just symbol set)
. Similarly, you can select either the default or the current symbol set for your
secondary font. You also may want to use the same symbol set for both
primary and secondary fonts.
67