Filter
Top Products
You can useadifferent command instead of these forgeneral character pitch
setting. This command, since it doesn’t have parentheses, covers both the
primary and secondary fonts. It looks like this:
<ESC> &k n S
For n you enter a pitch code from the following table:
CHARACTERS PER INCH
PITCH CODE n
10
cpi (pica) O(zero)
16.66 cpi (condensed)
2
Font height
The height of the characters you print is measured in point sizes. The Star
LaserPrinter4111provides fontsin6,7,8.5, 10, 12,14,16,18,24and 36point
sizes. If the font height you specifically ask for is not available, the printer
will select the font with the size closest to your request.
To select font height for the primary font use the following command. For
n enter the font height in points that you want:
<ESC>
(S n V
To select font height for the secondary font, send this command:
<ESC>
)S n V
Style
Style defines whether your text is printed in italicsor upright, the way these
words are. Send this command to select the style you want for the primary
font:
<ESC>
(S n S
in which for n you
enter
Oif you want normal upright text,
or 1 if you want italics.
70