Filter
Top Products
2. Tighten the two captive Phillips screws securing the removable media
assembly to the system chassis.
3. If necessary, install one or more plastic filler panels into any empty drive bay
openings in the RMA plastic cover.
Align the filler panel with its opening and press it into place.
4. Replace the RMA plastic cover.
Align the two posts on the bottom of the cover with the corresponding holes at
the front of the chassis, and align the tab on the top of the cover with its
corresponding hole and press down on the top of the center of the cover evenly
until it snaps into place.
5. Reconnect the removable media assembly SCSI cable to the removable media
SCSI cable connector.
136
Sun Enterprise 220R Server Service Manual ♦ January 2000, Revision A