ok probe-scsi
This command may hang the system if a Stop-A or halt command
has been executed. Please type reset-all to reset the system
before executing this command.
Do you wish to continue? (y/n) n
ok reset-all
ok probe-scsi
Primary UltraSCSI bus:
Target 0
Unit 0 Disk SEAGATE ST34371W SUN4.2G3862
Target 4
Unit 0 Removable Tape ARCHIVE Python 02635-XXX5962
Target 6
Unit 0 Removable Read Only device TOSHIBA XM5701TASUN12XCD0997
Target 9
Unit 0 Disk SEAGATE ST34371W SUN4.2G7462
Target b
Unit 0 Disk SEAGATE ST34371W SUN4.2G7462
ok
probe-scsi-all output:
ok probe-scsi-all
This command may hang the system if a Stop-A or halt command
has been executed. Please type reset-all to reset the system
before executing this command.
Do you wish to continue? (y/n) y
/pci@1f,4000/scsi@4,1
Target 0
Unit 0 Disk SEAGATE ST39102LC SUN9.0G0828
Target 1
Unit 0 Disk SEAGATE ST39102LC SUN9.0G0828
Target 6
Unit 0 Removable Read Only deviceTOSHIBA XM6201TA SUN32XCD1103
ok
224 Sun Enterprise 220R Server Service Manual ♦ January 2000, Revision A