Note - The Locked position prevents accidentally powering-off the system. See
Section 2.9.1 “Keyswitch Settings” on page 72 for information about each
keyswitch setting.
2.3 How to Initiate a Reconfiguration Boot
2.3.1 Before You Begin
After installing any internal or external storage device, or any new part that plugs
into the main logic board, except CPU modules or DIMMs, you must perform a
reconfiguration boot so that your system is able to recognize the newly installed
option(s).
A terminal or a graphics console is required for viewing system messages. For
information about connecting a terminal or a console, see Section 2.10 “About
Communicating With the Server” on page 73 or your Sun Enterprise 220R Server
Owner’s Guide.
Caution - Before you power on the system, make sure that the system cover is
properly installed and that the and doors are closed.
58 Sun Enterprise 220R Server Service Manual ♦ January 2000, Revision A