Tally Genicom 6600 Printer User Manual


 
Valid Control Sequences
125
(size) Scale factor affecting both height and unit width of
the bars, ranging from 1-8 (default = 1).
(option) Human Readable Characters option (default = 1)
1 = No characters
2 = Data Processing font
3 = OCR-A font
4 = OCR-B font
^C - Select Vertical Barcode
Selects Vertical Barcode and sets barcode parameters. Type, height, and size
parameters and options are the same as for Horizontal Barcode. Defaults are
the same as for horizontal (type = 1, height = 80, size = 1).
Command ^C(type);(height);(size)NL
^D - Select Double Density Block Characters
Selects 120 dots per inch and sets Block Character parameters.
Command ^D(height);(width)NL
Argument
(height) Character Height = 0.12 inches x height multiplier
or
Height Multiplier = Character Height/0.12.
Line feed distance = Unit line x height multiplier,
(Unit line = unit line height set by ^U control
sequence).
(width) Character width multiplier in the range 2-125
(default = 2). This also affects character cell width.
For example:
Character Width = 0.08 inches x Width multiplier
or
Width Multiplier = Character Width/0.08.
Character Cell Width = 0.10 inches x Width
multiplier
or
Width multiplier = Character cell Width/0.10.