Filter
Top Products
Barcode Version 2
65
<data> The alphanumeric characters to be encoded.
^G Command Terminator
Tab le 3 shows the available barcode styles and associated indices:
* These ratio numbers are to be read in pairs. They refer to the relative ratios
of the widths of the bars and gaps in barcode characters and correspond to
narrow bar/narrow gap, wide bar/wide gap, respectively. For example, the first
two numbers (1:2) in the INT2/5A barcode style indicates 1 unit for the narrow
bar width and 2 units for the narrow gap. These units are measured in dot-
columns for horizontal barcodes and dot rows for vertical barcodes.
Table 3. Valide Barcode Symbologies
Version 1
Index
Version 2
Index
Description Check Digits Ratio*
--- AIAG Code 39 None 1:1:3:3
--- EMBARC Code 39 None 1:1:3:3
--- HIBCC Code 39 Mod 43 1:1:3:3
A C39 Code 39 None 1:1:3:3
--- LOGMAR Code 39 None 1:1:3:3
B C39A Code 39 None 1:2:4:5
C C39M43 Code 39 Mod 43 1:1:3:3
D CBAR Codabar None 1:2:3:4:1:1:1:1
E --- Identicon 2/5 None 1:2:3;2
F MSI MSI None 1:1:2:2
G MSI10 MSI Mod 10 1:1:2:2
H MSI1010 MSI Mod 10/10 1:1:2:2
K INT2/5 Interleaved 2/5 None 1:1:3:3
L INT2/5A Interleaved 2/5 None 1:2:4:5
P UPCA UPCA 11 digit Mod 10 1:1:2:2:3:3:4:4
Q UPCE UPCE 10 digit Mod 10 1:1:2:2:3:3:4:4
R UPCE0 UPCE0 6 digit Mod 10 1:1:2:2:3:3:4:4
S UPCE1 UPCE1 6 digit Mod 10 1:1:2:2:3:3:4:4
T EAN13 EAN 13 digit Mod 10 1:1:2:2:3:3:4:4
U EAN8 Ean 8 digit Mod 10 1:1:2:2:3:3:4:4
Z C128 Code 128 Pseudo 103 1:1:2:2:3:3:4:4