Filter
Top Products
Version 2 logos
59
Version 2 logos
The Version 2 logo command prints all logos. The logo command must occur
within a Graphics Pass.
Command ^ILOGO,d,nn^G
Arguments
^ILOGO Version 2 logo command
d Density: H=high, L=low
nn A hex number indicating the logo to be used.
See Appendix C, “Logos” on page 271 for a listing
of logo numbers.
^G Command Terminator
NOTE: If “d” is left out, density defaults are low.
Example: The command
^M0202000^ILOGO,L,43^G^U0202000^ILOGO,L,43^G
^V0202000^ILOGO,L43^G^E0202000^ILOGO,L,43^G^- prints:
Pixel Expansion
The Pixel Expansion command expands logos, fonts, and plot data up to 255
times their original size. The Pixel Expansion command remains in effect until
a new Pixel Expansion command is received. To turn Pixel Expansion on,
send the following code.
Command ^IPEXP,h,v^G
Arguments
^IPEXP The Pixel Expansion command
h Represents the horizontal Pixel Expansion value,
which ranges from 1 to 255.
v Represents the vertical Pixel Expansion value,
which ranges from 1 to 255.
^G Command Terminator
Example 1: The code ^M0101000^ILOGO,L45^G^- prints the UL symbol in its
original size.