Filter
Top Products
7
Front and Rear Panels
7-4
Phaser 480X Color Printer
Front panel
Front panel indicator
Indicator On Blinking Off
POWER
The power switch is on. The power switch is off, or the
printer is unplugged, or the
power supply has failed.
READY
The printer is idle and ready for
operation.
The printer is processing or
printing an image.
The printer is not ready, or
there is an error.
ERROR
The print engine is cooling after printing
a dense image. Wait 5 minutes for the
indicator to go out. If it does not, turn
the printer off, wait 30 seconds, and
turn it back on again. If it is still lighted
after the power-up sequence, the print
engine has an error that is not
user-correctable and requires service.
Normal operation: there are
no print engine or controller
board errors.
JAM
Media is jammed inside the printer. Normal operation: there are
no media jams and the
transfer roll is installed.
Transfer roll is jammed inside the
printer.
Transfer roll is not installed.
MEDIA
There is no media in the tray, or the tray
is not installed.
Waiting for manual feed. Media is ready to feed.
COVER
The top cover is open. The printer does
not print while the cover is open.
Not applicable. Normal operation: the top
cover is closed.
TRANSFER
ROLL
Transfer roll is used up or there is not
enough of the transfer roll left for the
print job.
A/A4 transfer roll is installed
with B/A3/WB media. Part
of the image will be lost.
Normal operation: the
transfer roll is ready for use.
8849-48
ERROR JAM MEDIA
TRANSFER
ROLL
COVER READY POWER