Filter
Top Products
User Manual
A-1
Appendix
A
Technical Notes
Startup and configuration pages
You can print out a startup page and a conÞguration page that contain useful
information about your Phaser 480X. If you disable the startup page, keep a
copy near the printer for easy access to the information.
Enabling/disabling the startup page
When you receive your printer from Tektronix, the startup page is disabled.
However, when you want information such as the printer name, the number
of pages printed, or available ports, you can enable the startup page. The
Phaser 480X CD-ROM and diskettes include utilities for PCs (STARTPG.PS
and NOSTRTPG.PS) and for Macintoshes (LaserWriter Utility). For detailed
instructions on enabling and disabling the startup page, refer to the
Phaser 480X Drivers and Utilities Printing Reference.
Even if the startup page is enabled, you can power-up or reset your printer
without printing a startup page. To do this, pull out the paper tray before
power-up or reset; when the
READY light stops blinking, push the paper
tray back into the printer. The printer will be ready for printing, but will
have bypassed the startup page.