Filter
Top Products
Getting Set Up
2
User Manual
2-23
Note
The printer’s configuration page contains the information you
need to set up the printer port. Refer to “Configuration page” on
page A-3 to print the configuration page.
f.
Click on OK in the Connect dialog box and close the Printers
dialog box.
Macintosh drivers
The Tektronix CD-ROM and the Macintosh Printer Drivers diskette include
two Macintosh printer drivers that allow you to select page sizes, media
type, and TekColor color corrections for a Phaser 480X printer.
■ Use the Phaser 480X driver if you are using System Software 7.0
and later. The Phaser 480X driver is a Tektronix-modiÞed version
of AppleÕs LaserWriter 7.1.2 printer driver. If you are using
System Software 7.5 and QuickDraw GX, you must disable
QuickDraw GX before using this driver; the Phaser 480X driver
does not work with QuickDraw GX.
■ Use the Phaser 480X GX driver if you are using QuickDraw GX
and System Software 7.5 or later. The Phaser 480X GX driver
works with QuickDraw GX applications and with
non-QuickDraw GX applications.
Note
Information on installing and using the Phaser 480X GX driver
can be found on the CD-ROM, through the Internet, or on HAL
and EuroHAL, the Tektronix automated fax systems. Refer to “If
you need help” on page 6-1 for details on Internet access and on
using the HAL and EuroHAL systems.
The Phaser 480X Drivers and Utilities Printing Reference manual provides
detailed driver installation procedures and complete information on using
the Tektronix drivers with your printer.
In addition to installing a driver, you may also need to install PostScript
printer description Þles for applications such as Aldus PageMaker and
QuarkXPress. For details on printing from an application, refer to the
Phaser 480X Drivers and Utilities Printing Reference manual.