Filter
Top Products
Getting Set Up
2
User Manual
2-7
Loading the transfer roll
Note
To ensure the best print quality, load the transfer roll in an area
that is free of dust and dirt.
1.
Unwrap the new transfer roll and position it in the following
manner so that the take-up core (the empty side) is closest to you
and the supply core (the full side) is farthest away from you.
2.
Insert the four endcaps:
a.
Insert the black endcap into the left side of the supply core.
b.
Insert a green endcap into the right side of the supply core.
c.
Insert the green endcap into the right side of the take-up core.
d.
Insert a gray endcap into the left side of the take-up core.
e.
Make sure that the tabs on the endcaps Þt snugly into
the notches.
8849-06
2a
2d
2b
2c
2e