Filter
Top Products
3
Printing
3-2
Phaser 480X Color Printer
Printing from a Macintosh
The Tektronix CD-ROM and the Macintosh Printer Drivers diskette include
two Macintosh printer drivers that allow you to select printer features.
Using the Phaser 480X driver
1.
Make sure that the Tektronix printer driver for the Macintosh has
been installed. If it hasnÕt, refer to ÒInstalling a driver on your
computerÓ on page 2-21 for instructions.
2.
Select the driver:
a.
Select Chooser from the Apple menu.
b.
Select the Tektronix driver by clicking on the Phaser 480X
printer icon. (If it did not appear in the list of drivers, restart
your Macintosh and repeat the driver installation procedure.)
A list of printers available in the current zone appears.
c.
Select the zone where your Phaser 480X is connected.
d.
Select the printer by name (default is Phaser 480X).
You can change the default name with the LaserWriter Utility
which is on the CD-ROM and the Macintosh Printer Utilities
diskette. See the Phaser 480X Drivers and Utilities Printing
Reference for instructions.
3.
To print a Þle, use the Page Setup and Print commands from the
File menu within your application:
a.
In the Page Setup dialog box, select the desired paper size so
that the application uses the correct margins for the printer. To
see the printerÕs page sizes in the Page Setup dialog box, use
the pop-up menu to the right of the standard LaserWriter page
sizes.