Filter
Top Products
B
Expanding Your Printing System
B-4
Phaser 480X Color Printer
Startup file
You may load a startup Þle called Sys/Start onto your external
disk. You can use the Sys/Start Þle to customize printer operation. For
example, you can set the printerÕs color correction mode or load fonts into
the printerÕs memory. The CD-ROM or diskettes include utility Þles that
enable and disable the Sys/Start Þle (refer to the Phaser 480X Drivers and
Utilities Printing Reference for more information).
When you turn on the printer, it executes the Sys/Start Þle if the printerÕs rear
panel Switch 5 is in the down position. When Switch 5 is in the up position,
the Þle does not execute.
Guidelines for connecting SCSI disks
The printer can support up to seven
external disks connected at one time. When connecting a hard disk to the
printer, follow these guidelines:
■ You must turn on the disk(s) before you turn on the printer.
■ The printer must always be at one end of the chain with a
terminator at the other end.
■ With multiple disks, each disk must have a unique SCSI ID
number. Do not turn on the printer or disk until each disk has a
unique number.
■ With multiple disks, only one disk can contain a Sys/Start Þle.