Filter
Top Products
Getting Set Up
2
User Manual
2-13
5.
Load the paper into the paper tray with the printing side down (the
non-printing side is marked with
Tektronix):
a.
While pressing down on the tab of the metal plate, slide the
paper into the tray.
b.
Make sure that the hooks are positioned over the left and right
corners of the paper and that the paper is inserted evenly with
the printing side down.
c.
Do not Þll past the red line on the left inside wall of the paper
guide (approximately 50 sheets).
6.
Replace the plastic cover on the paper tray.
8849-13
5a
5b
5c