Filter
Top Products
Printing
3
User Manual
3-15
■
Using the color correction switches on the printer’s rear panel.
The Phaser 480X allows you to make color corrections with rear
panel Switches 8 and 9. If using the Tektronix driver, select Use
Printer Setting. The combinations of these two switches have the
following effect:
Note
If your printer is on a network and you have changed rear panel
Switches 8 or 9, make sure you tell other users on the network since the
switches affect all prints made with non-Tektronix drivers or the
Use Printer Setting option in the Tektronix drivers. The NVRAM
setting can be changed when both switches are up, by sending one of
the utility files from the CD-ROM or the diskettes.
Using the rear panel switches for color correction is only necessary
if you are not set up to use the Phaser 480X drivers. If you are using
TekColor Dynamic Correction in the Phaser 480X drivers, the
settings you choose in the drivers override the rear panel switches.
For complete information on color correction, refer to the
Phaser 480X Drivers and Utilities Printing Reference.
Switch 8 Switch 9 Color correction mode
down down No color correction
down up SWOP Press
(closely matches printing press colors)
up down Vivid Color
up up Use NVRAM setting (default setting is
Euroscale Press)