Filter
Top Products
MIX 56 User Manual 5 Owner Maintenance
122188-10 A0 Telect, Inc.
5-5
5. Insert a bantam plug into the jack and pull the jack straight out, as
shown below. You may need to wiggle the jack slightly to unseat it
from the connectors.
6. Insert the new jack into its slot and gently press it into place so that
the jack connectors insert into the chassis connectors.
7. Replace the upper and lower jack retainers and tighten the screws
until the retainers are securely attached to the chassis.
8. Re-install the faceplate.