Filter
Top Products
MIX 56 User Manual 5 Owner Maintenance
122188-10 A0 Telect, Inc.
5-7
2. Using the M13 card ejector handle, gently pull the card straight out
of the chassis, as shown below.
3. Align the new card with the card guides and gently insert it into the
chassis by pressing the ejector handle against the card and pushing
the card back.
4. Again, touching only the ejector handle, firmly press the M13 card
into place so that the connectors on the card fully mate with the
connectors inside the chassis.
5. Reattach the M13 card door.
M13 Card
Ejector Handle